Three-Layer Tunnel Oven for Food and Health Products

Product Name: Three-Layer Tunnel Oven for Food and Health Products

Drying Section Inner Chamber Dimensions

Single Layer: Length 8000mm × Height 120mm × Maximum Width 1000mm

Overall Dimensions

Length 9000mm × Height 1630mm × Width 1500mm

Height from Ground to Upper Surface of Feeding Belt: 850mm (±20mm Adjustable)

Total Drying Section Length: 8000mm, Divided into 4 Temperature Zones

Feeding Section Length: 700mm

Discharging Section Length: 300mm

Temperature Parameters

Temperature Range: Ambient ~ 200°C (Common Use: 150°C)

Instrument Display Accuracy: ±0.1°C (Adjustable)

Temperature Fluctuation: ≤±2°C

Temperature Uniformity: ≤±2°C (No-Load)

Heating Rate: ≥7°C/min

Shell Temperature Rise: ≤ Ambient +15°C; Around Joints: ≤ Ambient +30°C

Air Circulation Mode

Horizontal Circulating Air

Power Supply

Three-Phase Five-Wire System, 380V, 50HZ

Total Power: Approximately 55KW

Product Features of Three-Layer Tunnel Oven for Food and Health Products

Intelligent Temperature Control

Automatically calculates output power via PTD (Power Time Differential) based on user-set temperature values. Output power decreases as the set temperature is approached, achieving constant temperature control and energy savings.

Over-Temperature Alarm

Automatically cuts off heating power when the detected temperature exceeds the set value, providing dual protection.

Acoustic-Optic Alarm

Equipped with an alarm light and buzzer for fault notifications.

Grounding Protection

Structural components with safety grounding to ensure operational safety.

Phase Loss/Phase Sequence Protection

Installed with a phase sequence protector to prevent damage from power supply anomalies.

Environmental Conditions

Ambient Temperature: -5°C ~ +40°C

Relative Humidity: ≤85%RH

Power Supply: AC380V±10%, 50HZ, Three-Phase Five-Wire System

Product Materials

Furnace Structure and Shell

Shell Material: 1.5mm thick Q235 cold-rolled steel plate (excellent strength, plasticity, and weldability) formed by bending and welding.

Surface Treatment:

Grinding, polishing, and phosphating to enhance corrosion resistance and paint adhesion.

High-temperature spray coating (large corrugated type) for rust and corrosion prevention, color: 'C7035' (RAL 7035 gray).

Inner Chamber

Material: 1.5mm thick SUS304# stainless steel plate, ensuring a clean, dust-free interior with rust and corrosion resistance.

Protection Devices

Timed Alarm and Power-Off Device

Over-Temperature Power-Off Protection

Leakage Protection Circuit Breaker

Motor Overload Protection

Application Scope

Suitable for heating, dehumidification, ripening, puffing, and other processes in the food industry and health product industry.