Medical Device UV Curing Machine

Detailed Introduction to Medical Device UV Curing Machine

UV Curing Machine Dimensions

Overall Dimensions: Total Length 3000mm × Total Width 800mm × Total Height 1520mm

Temperature Parameters

Temperature Range: ≤55°C (Note: 'Below -55°C' in the original may be a typo; logically adjusted to ≤55°C).

In-Furnace Monitoring: Equipped with a temperature monitoring system and acoustic-optic alarm for abnormal temperature.

Cooling Method: Forced air cooling

Shell Temperature:

Temperature rise ≤ ambient -15°C (Note: 'Environment -15°C' may imply the shell temperature is 15°C lower than ambient; clarify if needed).

Around joints ≤ ambient +30°C

Power Supply: Three-phase five-wire system, AC380V, 50Hz

Total Power: 7.5KW

Shell Materials

Material: 1.5mm thick Q235 cold-rolled steel plate (excellent strength, plasticity, and weldability), formed by bending and welding.

Surface Treatment:

Grinding, polishing, and carbonization (enhances corrosion resistance and paint adhesion).

High-temperature spray coating (large corrugated type) for rust and corrosion prevention, color: 'computer white' (customizable to customer-provided color swatches).

Structural Features

Cooling Motor: Kyushu Industrial centrifugal fan (0.37KW air circulation motor) to maintain UV furnace temperature ≤55°C.

Conveyor System:

Teflon mesh belt, 500mm width, stepless speed regulation.

Height from conveyor surface to ground: 750mm.

UV Light Source:

3 sets of 2KW original UV light sources.

Lamp specifications: Total length 620mm, effective light distance 500mm, peak wavelength 365nm.

Independent automatic timers for each light source to monitor usage time (lamp lifespan: 1000 hours).

Transformer & Capacitor: Branded step-up transformers, capacitors, and triggers.

Infrared Filtration:

Imported coated quartz heat-insulating glass for each lamp to block infrared radiation and prevent product deformation.

UV mirror reflection devices enhance UV light utilization rate to 35%.

Control System

Control Cabinet: Located at the bottom of the UV zone, enabling independent temperature control and display.

Electrical Components: Genuine Chint brand control electrical components.

Safety Features:

Over-temperature Alarm: Automatically cuts off heating power when temperature exceeds the set value (dual protection).

Acoustic-Optic Alarm: Alarm light with buzzer.

Grounding Protection: Structural components with safety grounding.

Phase Loss/Phase Sequence Protection: Phase sequence protector installed.

Environmental Conditions:

Ambient temperature: -5°C ~ +40°C

Relative humidity: ≤85%RH

Power supply: AC380V±10%, 50Hz, three-phase five-wire system