Auto Parts Curing Oven

Main Technical Parameters of Auto Parts Curing Oven

Equipment Dimensions: 5600×1064×1500MM (Length×Width×Height)

Temperature Range: Controllable from ambient temperature to 150°C

Instrument Display Accuracy: ±0.1°C

Temperature Control Accuracy: ≤±2.5°C

Temperature Uniformity: ≤±2.5% (No-load)

Heating Rate: ≥8°C/min

Shell Temperature: Temperature rise ≤ ambient +15°C; around joints ≤ ambient +30°C

Power Supply: Three-phase five-wire system, 380V, 50HZ

Air Circulation Mode: Horizontal circulating air with controllable air intake

Total Power: Approximately 40KW

Shell Material of Auto Parts Curing Oven

Made of 1.5mm thick Q235 cold-rolled steel plate (excellent comprehensive performance in strength, plasticity, and weldability) through bending and welding.

Structural Features of Auto Parts Curing Oven

Surface Treatment

Grinding, Polishing, Phosphating: Surface grinding, polishing, and phosphating treatment to enhance metal corrosion resistance and paint adhesion.

High-temperature Spray Coating: Large corrugated high-temperature spray coating for rust and corrosion prevention, standard color is 'computer gray' (can be color-matched according to customer-provided color panels).

Inner Lining Material

Constructed with 1.5mm thick SUS304 stainless steel plate to maintain a clean and dust-free inner chamber, with rust and corrosion resistance.

Insulation Material

Adopts 100K dense-type aluminum silicate rock wool with a thickness of 100mm, featuring non-combustibility and strong heat insulation.